Royalty Report: Environmental Control, Recycling, Energy & Environment – Collection: 192398

$150.00

Curated Royalty Rate Report
Category: Technology Licenses, Created On: 2022-04-28, Record Count: 20

Description

This collection of transactions and supporting information was developed using our AI algorithm to curate similar royalty reports into a cohesive collection to support your licensing, transfer pricing or other transaction scenarios where documented royalty rates and/or deal terms are important.
Category: Technology Licenses
Created On: 2022-04-28
Record Count: 20

Primary Industries

  • Environmental Control
  • Recycling
  • Energy & Environment
  • Waste Treatment
  • Plastics & Rubber
  • Material Composite
  • Energy Resources & Svcs
  • Alternative and Renewable Energy
  • Chemicals
  • Remediation
  • Air Pollution
  • Motor Oil Recovery
  • Petroleum Refining
  • Construction
  • Metals & Metal Products
  • Technical Know How

IPSCIO Report Record List

Below you will find the records curated into this collection.  This summary includes the complete licensed property description so that you can review and determine if this collection covers the topics, technology or transaction type that is relevant for your needs.  The full report will include all relevant deal data such as the royalty base, agreement date, term description, royalty rates and other deal terms.  For reference, here is a sample of a full IPSCIO curated royalty rate report: Sample Report

IPSCIO Record ID: 192398

License Grant
The Company  granted  tire  recycling license  rights, known as TRTM, for Europe,  Australia,  New Zealand,  and South Africa to an undisclosed company.
License Property
The TRTM recycling  technology involves shredding the feed waste using conventional equipment.  The Titan technology utilizes pyrolysis to recycle tires and other scrap material.

The TRTM process is a closed system and the only emissions are exhaust gases from clean-burning fuels (most of which are generated by the process itself) and a small amount of dirt and ash which is environmentally suitable for normal landfill. In fact, non-condensable gases recovered using TRTM technology provide the fuel to generate required process heat for pyrolysis.

The technology used to recover hydrocarbons, carbon and metals from electronic scrap and automobile fluff also utilizes pyrolysis to recover the hydrocarbons and carbon followed by other conventional processes to recover the metals.

The carbon black produced through TRTM pyrolysis consists of the various grades which went into manufacture of the tire. Because of the very fine physical composition of the material, it is not realistically practicable to separate the product by grade. In addition, carbon black produced through pyrolysis contains varying amounts of ash attributable to other minor materials used in manufacturing the tire.

The present invention relates to destructive distillation apparatus. More particularly, the present invention relates to discharge systems for apparatus useful in the destructive distillation of waste automobile tires.

Field of Use
This agreement is for the recycling industry.

IPSCIO Record ID: 141167

License Grant
Pursuant to the agreement between the Licensor and a South Korean Licensee, three plants in Asia have been constructed and the Licensors tire recycling technology known as TRTM.
License Property
The TRTM recycling  technology involves shredding the feed waste using conventional equipment.  The Titan technology utilizes pyrolysis to recycle tires and other scrap material.

The TRTM process is a closed system and the only emissions are exhaust gases from clean-burning fuels (most of which are generated by the process itself) and a small amount of dirt and ash which is environmentally suitable for normal landfill. In fact, non-condensable gases recovered using TRTM technology provide the fuel to generate required process heat for pyrolysis.

The technology used to recover hydrocarbons, carbon and metals from electronic scrap and automobile fluff also utilizes pyrolysis to recover the hydrocarbons and carbon followed by other conventional processes to recover the metals.

The carbon black produced through TRTM pyrolysis consists of the various grades which went into manufacture of the tire. Because of the very fine physical composition of the material, it is not realistically practicable to separate the product by grade. In addition, carbon black produced through pyrolysis contains varying amounts of ash attributable to other minor materials used in manufacturing the tire.

The present invention relates to destructive distillation apparatus. More particularly, the present invention relates to discharge systems for apparatus useful in the destructive distillation of waste automobile tires.

Field of Use
This agreement is for the recycling industry.

IPSCIO Record ID: 1080

License Grant
The Licensor entered into a Licensing Agreement with an unrelated investor group, the Licensee, for the use of its recycling patent and technology.
License Property
The TRTM process is a closed system and the only emissions are exhaust gases from clean-burning fuels (most of which are generated by the process itself) and a small amount of dirt and ash which is environmentally suitable for normal landfill. In fact, non-condensable gases recovered using TRTM technology provide the fuel to generate required process heat for pyrolysis.

The technology used to recover hydrocarbons, carbon and metals from electronic scrap and automobile fluff also utilizes pyrolysis to recover the hydrocarbons and carbon followed by other conventional processes to recover the metals.

The carbon black produced through TRTM pyrolysis consists of the various grades which went into manufacture of the tire. Because of the very fine physical composition of the material, it is not realistically practicable to separate the product by grade. In addition, carbon black produced through pyrolysis contains varying amounts of ash attributable to other minor materials used in manufacturing the tire.

The present invention relates to destructive distillation apparatus. More particularly, the present invention relates to discharge systems for apparatus useful in the destructive distillation of waste automobile tires.

IPSCIO Record ID: 539

License Grant
The Company signed a License Agreement for the exclusive right to build recycling facilities in North, Central and South America utilizing Titan’s tire recycling technology (Agreement).
License Property
'Invention' or 'Inventions' means the Titan process and processes for recycle of tires, together with equipment, reagents and proprietary knowledge utilized to employ the Technology and the products and processes related to or included therein.

Patent Rights shall mean United States Patent Numbers 5,714,043 and 5,871,619 issued by the U.S. Patent and Trademark Office.

The TRTM process is a closed system and the only emissions are exhaust gases from clean-burning fuels (most of which are generated by the process itself) and a small amount of dirt and ash which is environmentally suitable for normal landfill. In fact, non-condensable gases recovered using TRTM technology provide the fuel to generate required process heat for pyrolysis.

The technology used to recover hydrocarbons, carbon and metals from electronic scrap and automobile fluff also utilizes pyrolysis to recover the hydrocarbons and carbon followed by other conventional processes to recover the metals.

The carbon black produced through TRTM pyrolysis consists of the various grades which went into manufacture of the tire. Because of the very fine physical composition of the material, it is not realistically practicable to separate the product by grade. In addition, carbon black produced through pyrolysis contains varying amounts of ash attributable to other minor materials used in manufacturing the tire.

Field of Use
Field of Use shall mean use of the Invention or Technology or Patent Rights for recycle of tires and other rubber products of whatsoever origin into reusable products.

IPSCIO Record ID: 178849

License Grant
In amendment of the license Agreement on certain patent rights for the construction and sublicensing  for the Tire Recycling Plant Type TRTM 60, the parties hereto agree that the scope of the exclusive license agreed in the License Agreement shall be expanded to North  America and South  America  with the exception of any agreements or negotiations executed or begun prior to October 31, 1996.
License Property
The patents, patent applications and technical experience based on the TRTM-60 Technology which it has invented and developed to operation standard as the 'Tire Recycling Plant TRTM-60'.

The TRTM-60 Technology employs enhanced pyrolysis, which, unlike known competing scrap tire recovery systems, is true tertiary recycling the original elements that went into making the tires, primarily oil, steel and carbon black, are reclaimed in near virgin form. The carbon black recovered by the TRTM-60 tire recycling process is a semi-reinforcing carbon black.

Field of Use
This agreement pertains to the environment industry relating tire recycling.  The material field for the purposes of this agreement be taken to mean the development, design and the constructing of TRTM-60 plant according to the system as explained by the patent (s) applications.

IPSCIO Record ID: 177053

License Grant
The Licensor hereby grants to the Licensee the exclusive right under agreement patent rights and Know-How  To construct in Europe and South Africa Tire Recycling Plants, Type TRTM-60;  To grant sublicenses of the agreement patent rights and know-how after having received the prior written consent of the Licensor;  Licensor moreover grants the nonexclusive right to construct and grant sublicenses with respect to the aforesaid rights in Saudi Arabia and the United Arab Emirates;  Transfer and assignment  of the license  right by the Licensee is excluded and requires a special agreement between the parties.
License Property
The patents, patent applications and technical experience based on the TRTM-60 Technology which it has invented and developed to operation standard as the 'Tire Recycling Plant TRTM-60'.

The TRTM-60 Technology employs enhanced pyrolysis, which, unlike known competing scrap tire recovery systems, is true tertiary recycling the original elements that went into making the tires, primarily oil, steel and carbon black, are reclaimed in near virgin form. The carbon black recovered by the TRTM-60 tire recycling process is a semi-reinforcing carbon black.

Field of Use
This agreement pertains to the environment industry relating tire recycling.  The material field for the purposes of this agreement be taken to mean the development, design and the constructing of TRTM-60 plant according to the system as explained by the patent (s) applications.

IPSCIO Record ID: 4880

License Grant
The Company entered into a world-wide exclusive license agreement for the commercialization of the Smokeless, Scrap Tire Processing Technology (SSTP) from an undisclosed Licensor.
License Property
The SSTP technology was developed to recover the oil, steel and carbon black that was utilized in the manufacture of tires; no emissions and, therefore, no residue from combustion.  The entire tire recycling process is a closed system.  There are no emissions, which means there is no release of pollutants into the atmosphere.
Field of Use
The rights granted apply to tires.

IPSCIO Record ID: 4489

License Grant
The Licensor will hereby grant to the Irish Licensee the exclusive rights to the waste to oil process in the territories as so set forth. The Licensee has the obligation to install and operate a defined number of plants over a period of time in the territories.
The Licensor will grant the Licensee the rights to the Process for a period of 20 years effective the date of signature by both parties. The parties agree to negotiate in good faith for a renewal of an additional 20 years by specific territory and the specific implementation of the process.
License Property
The Licensor is an energy and technology company with the primary focus on generating fuel from waste plastic and rubber material. The Licensor has developed and owns a process that converts certain waste material into high-grade oil and other by-products, specifically steel, carbon and syngas.

The Process System consists of pre-processing equipment, two oil conversion systems, two secondary distillation systems, two chloride removal systems and associated storage containers. A Plant is defined as an operating facility consisting of two such Systems.

Twin Reactor Pyrolysis Converting System (GETH Process)
Process description over view
The tires and plastic to oil process is composed of a combination of three processes that have been placed in line so that they operate as one complete system. These processes will be further described throughout the narrative. The first system is the Pyrolysis Induction system. This converts tire and plastic feedstock into sweet crude oil. The second system is what is called a secondary distillation process. This equipment is directly hooked up to the Pyrolysis converter and flows oil into a secondary reactor, then through the distillation process to further refine the oil. This is accomplished by running the oil through a secondary heat signature. The last piece of equipment is the Catalyst filtration system. The oil is directly hooked up to this system; the oil is re-heated to 500 deg F and is then processed through a catalyst media that removes any residual organic chloride. From here the oil is moved into the finished product storage vessels.

Pyrolysis System
Equipment Description
The Twin Reactor system consists of two rotational reactor chambers that are operated via an Electrical Heated Induction process. Each reactor is operated independently. The system is controlled by a semi-computerized process controller that monitors heat at three different zones on the reactor. As the feed stock material temperature rises it turns into a vaporous gas, which in turn moves through a separation chamber. At the separation chamber there are four specific activities that take place. The first stage of feed stock vaporization. This takes place around 700 deg F. Oil that is heavier than air is released to a contained reservoir that stores the heavy oil; the second stage “light oil” is fully vaporized and is moved to the condensing vessels where it turns into light sweet crude oil. The third and last by product that is emitted from the separator is carbon black that is released through a valve gate at the bottom of the separator. The carbon black goes into a contained storage vessel, which is sealed so that the carbon black is fully captured without it becoming air borne. Once the gases are fully vaporized and condensed into oil it is move onto the main storage vessel. The last by product is residual gases that are processed through a filtration process to clean in residual carbon; the gas is then compressed into LPG storage vessels.The entire process is a closed loop system that contains and processes vapor’s and gases throughout the entire process. At no time are there any gases or vapors emitted into the atmosphere. The reactor chamber hatch is closed and sealed throughout the entire process cycle; it is only opened once all of the vapors and gases have been evacuated from the reactor chamber. There is a main check valve in place between the reactor and the separator that prevents any gases or vapors from flowing back into the reactor chamber. All the by-products are separated into their own specific storage vessels until they are shipped. All products will be shipped by certified transporters. The transporters have all the necessary pumps and valve systems to eliminate any vapors or emissions from being released into the atmosphere during tanker loading process.

IPSCIO Record ID: 4293

License Grant
The English Licensee entered into a License Purchase Agreement with the Japanese Licensor.

The Licensee has acquired the exclusive rights in North America and Europe to use the Tyrolysisâ„¢ technology owned by the Licensor.

The Licensor holds these rights under separate License, and pursuant to the Agreement, has assigned them to the Licensee.

License Property
The Tyrolysis™ technology is a comprehensive ‘closed-loop’ solution for the management of scrap tires, which allows for all scrap tires to be either re-manufactured into new tires or reduced, through a carbonization process, into marketable chemical products such as diesel fuel, carbon black and syn-gas.
Field of Use
The Tyrolysis(TM) technology is a comprehensive 'closed-loop' solution for the management of scrap tires, which allows for all scrap tires to be either re-manufactured into new tires or reduced, through a carbonization process, into marketable chemical products such as diesel fuel, and steel. The carbon char material will be upgraded to produce a general purpose carbon black that can be used again in the rubber, plastic and asphalt industries. Syn-gas is used for process heat within the system.

IPSCIO Record ID: 540

License Grant
The Company signed a License Agreement for the exclusive right to build recycling facilities in North, Central and South America utilizing Titan’s tire recycling technology.
License Property
'Patent Rights' shall mean United States Patent Numbers 5,714,043 and 5,871,619 issued by the U.S. Patent.
Field of Use
Field of Use shall mean use of the Invention or Technology or Patent Rights for recycle of tires and other rubber products of whatsoever origin into reusable products.

IPSCIO Record ID: 7144

License Grant
The Company entered into a Licensing Agreement with the Licensor for exclusive licensing rights for technology relating to the processing of organic waste to marketable by-products via the Advanced Pyrolysis System 200 (“APS200”).
The Company will have exclusive rights to sub-license, establish joint ventures to commercialize, use and process organic waste, and sell related by-products in the territory of Jamaica, WI.
License Property
Pyrolysis Decomposition brought about by high temperatures.

The APS200 system is designed to handle commonly generated waste stream, whether liquid, solid, mixed or unmixed (including whole tires, all types of plastics, e-waste, shredder residues, sewage sludge, animal wastes, biomass, ligneous and infectious biohazard medical waste) and represent an environmentally friendly and commercially viable alternative to traditional methods of processing waste. The solutions are commercially viable ecological recycling models based on zero-waste philosophy. We will initially be focused on using the application for processing waste tires for conversion to biochar and fuel oil.

IPSCIO Record ID: 1983

License Grant
The Licensor hereby grants to Licensee an exclusive right to practice the Technology of Nevada in order to use and operate Plants and/or sell equipment in the Territory; certain intellectual and industrial property rights with respect to tire recycling and recovery processes from the company and other recycling technologies.

Plant shall mean a tire recycling and recovery facility operated pursuant to the rights granted to Licensee/sub licensee hereunder.

License Property
The Licensor possesses certain intellectual and industrial property rights with respect to tire recycling and recovery processes from the company and other recycling technologies.

The Licensor which is engaged in the worldwide marketing of automobile and truck tire recycling equipment which produces recycled rubber which is commonly known in the recycling industry as crumb rubber.  The Licensor also markets presses and other equipment which utilize crumb rubber to make various after-market products.

IPSCIO Record ID: 29279

License Grant
Licensor hereby grants to Licensee the exclusive, worldwide right and license to commercialize, use and exploit the Inventions for any purpose whatsoever, whether in recycling tires or in other commercial activities; to practice the processes of recycling tires through the use of proprietary technology utilizing wavelength specific microwaves and sub atmosphere vacuum chambers; to make, assemble, and use apparatus, machinery, auxiliaries, and all devices for carrying such Inventions and processes into practice; and to make, use, sell, or dispose of the products of such processes and apparatus, machinery, auxiliaries, and devices.

IPSCIO Record ID: 931

License Grant
This patent license agreement grants to Licensee a non-exclusive, non-transferable, worldwide license to practice the methods and to make, use, and sell, the products and/or Services covered by the Proprietary Rights.
License Property
U.S. Patent Number 5,711,820, 'Method to Separate and Recover Plastic from Plastic Contaminated with Oil'.

This new environmental technology, the System, is believed by management to be the only pollution reduction and recycling system on the market today that allows for the 100% recycling of plastic motor oil containers and the residual oil left inside each container. By using the carbon dioxide cleaning process, the Company can focus on environmental protection and environmental safety by creating no chemical waste disposal in the oil recycling and plastic recycling process.

Field of Use
The field of use is limited to the field of use of separating and recovering motor oil from high density polyethylene plastic (HDPE).

The Company  uses patented technology and proprietary equipment to design and sell worldwide oil and agricultural chemical container recycling equipment and related systems.

IPSCIO Record ID: 5129

License Grant
Licensor hold an exclusive worldwide license to certain pyrolytic carbon extraction technology, which is a technology used to convert solid hydrocarbon-based waste into a multi-use fuel in the form of a combustible gas while significantly reducing the waste volume.

The Licensor hereby grants to the Licensee the exclusive world-wide right and license to use, commercialize, and exploit the PCE and/or GWE Technology, including the right to sublicense.

License Property
Licensor is the possessor of rights and information related to PCE and other pyrolosys and carbon processing devices and other processes or systems, including, but not limited to, patent applications, inventions, inventive concepts, improvements, modifications, trade secrets, and/or know-how related to pyrolosys devices, processes or systems all of the aforesaid being hereinafter jointly referred to as the 'PCE and/or GWE Technology'.  

Pyrolytic Carbon Extraction, or 'PCE' is a  liquid and solid waste treatment processes, respectively, that produce combustible gases.  Pyrolytic carbon extraction technology, which is a technology used to convert solid hydrocarbon-based waste into a multi-use fuel in the form of a combustible gas while significantly reducing the waste volume.

Our Green Waste to Energy pyrolysis processor, or GWE, is a promising development project to process solid hydrocarbon-based waste and produces a multi-use fuel in the form of a combustible gas. The by-products we obtain through our GWE process may then be sold commercially. We believe that, because this process runs on its own by-products, there are no emissions and, therefore, no residue from combustion. In addition, the GWE is modular in its design and can handle a number of different waste streams simultaneously.

Field of Use
Licensee is a technology development company which for the past twelve months has been developing a pyrolytic carbon extraction 'PCE' technology for which there are now two patents pending and that the inventor of such devices has suffered a nervous breakdown making his continued involvement impossible. That the Licensee successfully demonstrated the PCE technology to include a 5 to 10-ton per day prototype PCE device and that the nervous breakdown of the inventor has mandated the Company complete the development of the PCE technology separate and apart from such patents pending.

IPSCIO Record ID: 380686

License Grant
Under the terms of the Agreement, the Licensor shall grant the Licensee a five-year license related to the recycling of industrial byproduct and demolition materials into manufacturing cement free pavers and mortars that absorb carbon dioxide.
License Property
Licensor is a specialist in the development of practical, cost effective solutions to waste and environmental issues.
Field of Use
The trade secret licensing agreement is to develop environmentally friendly construction materials and products that capture carbon dioxide during the manufacturing process.

Licensee can utilize a worldwide trade secret license for upcycling construction and demolition waste material and industrial waste byproducts into sustainable and cement-free pavers and mortars that capture carbon dioxide during the manufacturing process.

This agreement relates to recycling.

IPSCIO Record ID: 29171

License Grant
University hereby grants to Licensee a royalty-bearing, exclusive license, in the Territory to make, have made, use, offer for sale, sell, modify, develop, import, export or otherwise exploit Licensed Products.  Also University grants to Licensee the right to grant sublicenses. The Licensee acquired an exclusive, royalty-bearing License in specific but broad global territories to make, have made, use, sell, offer for sale, modify, develop, import, export products made using patent applications owned by the Licensor.
License Property
We believe these technologies can transform recycled consumer and industrial plastics into structural products which are more durable and have a substantially greater useful life than traditional products made from wood, steel and concrete.  In addition, we believe our recycled composite products will result in substantial reduction in greenhouse gases and also offer flexible design features not available in standard wood, steel or concrete products.

1. RU Docket 90-1126, U.S. Patent No. 5,298,214 entitled “Method of Deriving Polystyrene and Polyolefin Plastics Composite from Recycled Plastics”.

2. RU Docket 96-0404, U.S. Patent No. 5,789,477 entitled “Composite Building Materials from Recyclable Waste”.

3. RU Docket 96-0404D, U.S. Patent No. 5,916,932 entitled “Composite Building Materials from Recyclable Waste”.

4. RU Docket 03-096 entitled “Structural Plastic I-Beams” Patent Pending.
5. RU Docket 05-033 entitled “Structural Material Composed of PMMA with HDPE”, Patent Pending.

6. RU Docket 05-064 entitled “Processing Technology to Increase Toughness”, Patent Pending.

7. RU Docket 06-042 entitled “Railroad Tie Not Needing a Tie Plate”, Patent Pending.

8. RU Docket 06-094 entitled “Damage Resistant Fire Retardant and Intumescent Coatings for the Protection of Substrates from Heat Flux” “, Patent Pending.

9. RU Docket 07-005 entitled “Emissivity Based Silicone/Glass Fiber Composites for the Protection of Substrates from Heat Flux “, Patent Pending.

10. RU Docket 06-131 entitled “Method of Producing Long I-beams with Capability of Variable Tapers from Structural Polymer Based Materials”, Patent Pending.

1. RU Docket 90-1126, U.S. Patent No. 5,298,214 entitled “Method of Deriving Polystyrene and Polyolefin Plastics Composite from Recycled Plastics”.
2. RU Docket 96-0404, U.S. Patent No. 5,789,477 entitled “Composite Building Materials from Recyclable Waste”.
3. RU Docket 96-0404D, U.S. Patent No. 5,916,932 entitled “Composite Building Materials from Recyclable Waste”.
4. RU Docket 03-096 entitled “Structural Plastic I-Beams” Patent Pending.
5. RU Docket 05-033 entitled “Structural Material Composed of PMMA with HDPE”, Patent Pending.
6. RU Docket 05-064 entitled “Processing Technology to Increase Toughness”, Patent Pending.
7. RU Docket 06-042 entitled “Railroad Tie Not Needing a Tie Plate”, Patent Pending.
8. RU Docket 06-094 entitled “Damage Resistant Fire Retardant and Intumescent Coatings for the Protection of Substrates from Heat Flux” “, Patent Pending.
9. RU Docket 07-005 entitled “Emissivity Based Silicone/Glass Fiber Composites for the Protection of Substrates from Heat Flux “, Patent Pending.
10. RU Docket 06-131 entitled “Method of Producing Long I-beams with Capability of Variable Tapers from Structural Polymer Based Materials”, Patent Pending.

Field of Use
The Licensee plans to use these revolutionary patented technologies in the production of structural plastic products such as railroad crossties, bridge infrastructure, utility poles, marine pilings, and bulk heading.

IPSCIO Record ID: 3559

License Grant
The Licensor grants to the Licensee the exclusive and worldwide right and license to commercialize, use and exploit the described inventions; to practice the processes of recycling   tires through the use of proprietary technology utilizing wavelength specific microwaves and sub atmosphere reverse polymerization chambers; to make, assemble, and use apparatus, machinery, auxiliaries, and all devices for carrying such inventions and processes into practice; and to make, use, sell, or dispose of the products of such processes and apparatus, machinery, auxiliaries, and devices.
The Licensor hereby grants to the Licensee the right to grant sublicenses.
License Property
The Licensor has made certain inventions regarding processes and apparatus for recycling tires through the use of proprietary technology utilizing wavelength specific microwaves and sub atmosphere reverse polymerization chambers.
Field of Use
The Licensee desires to acquire a license to commercialize such inventions and to operate and use such processes and apparatus and to make, sell, use, and otherwise dispose of products which may be processed there under.

IPSCIO Record ID: 4336

License Grant
The Licensee entered into a Licensing Agreement with the Licensor for exclusive licensing rights for technology relating to the processing of organic waste to marketable byproducts via the Advanced Pyrolysis System 200 (APS200).

The Licensee will have exclusive rights to sub-License, establish joint ventures to commercialize, use and process organic waste, and sell related byproducts in the territory of the Bahamas, Dominican Republic, St., Thomas, St. Maarten, and Grenada for 20 years.

License Property
The APS200 system is designed to handle commonly generated waste stream, whether liquid, solid, mixed or unmixed (including whole tires, all types of plastics, e-waste, shredder residues, sewage sludge, animal wastes, biomass, ligneous and infectious biohazard medical waste) and represent an environmentally friendly and commercially viable alternative to traditional methods of processing waste. The solutions are commercially viable ecological recycling models based on zero-waste philosophy. We will initially be focused on using the application for processing waste tires for conversion to biochar and fuel oil.

IPSCIO Record ID: 6389

License Grant
LICENSOR hereby grants to LICENSEE an exclusive, non-transferable license to use THE PROCESS within the FIELD OF USE within the TERRITORY.
License Property
LICENSOR is the owner of intellectual property, which is useful in the extraction of precious metals from ore, concentrates and various other materials, (herein THE PROCESS).

The Licensee will utilize the Licensor's thiourea lixiviation technology for the extraction of precious metals from the electronic scrap that results from recycling of electronic products such as computers, monitors and television sets, E-Ore, in North America.

Field of Use
LICENSEE intends to own or control various E-Ore processing facilities which produce products containing precious metals which can be extracted using THE PROCESS.
Disclaimer: The information gathered from RoyaltySource® database was sourced from the U.S. Securities and Exchange Commission EDGAR Filings and other public records. While we believe the sources to be reliable, this does not guarantee the accuracy or completeness of the information provided. Further, the information is supplied as general guidance and is not intended to represent or be a substitute for a detailed analysis or professional judgment. This information is for private use only and may not be resold or reproduced without permission.