Royalty Report: Construction, Transportation, Pipeline & Power Line – Collection: 179834

$150.00

Curated Royalty Rate Report
Category: Technology Licenses, Created On: 2022-04-28, Record Count: 14

Description

This collection of transactions and supporting information was developed using our AI algorithm to curate similar royalty reports into a cohesive collection to support your licensing, transfer pricing or other transaction scenarios where documented royalty rates and/or deal terms are important.
Category: Technology Licenses
Created On: 2022-04-28
Record Count: 14

Primary Industries

  • Construction
  • Transportation
  • Pipeline & Power Line
  • Technical Know How
  • Coating
  • Chemicals
  • Automotive
  • Material Composite
  • Plastics & Rubber
  • Process Improvement
  • Coating surface
  • Building Mtls & Construction
  • Corrosion Protection
  • Machinery
  • Energy Resources & Svcs

IPSCIO Report Record List

Below you will find the records curated into this collection.  This summary includes the complete licensed property description so that you can review and determine if this collection covers the topics, technology or transaction type that is relevant for your needs.  The full report will include all relevant deal data such as the royalty base, agreement date, term description, royalty rates and other deal terms.  For reference, here is a sample of a full IPSCIO curated royalty rate report: Sample Report

IPSCIO Record ID: 179834

License Grant
Japanese Licensor hereby grants to Licensee the exclusive license to use the Installation Technology in the territory. In this case for rehabilitating sewers, tunnels, pipelines or other passageways in the Application only, unless otherwise agreed, and on the terms as follows.
License Property
Licensor developed PALTEM HOSE LINING System (commonly called PALTEM-HL System) for gas pipes of main and small main, and independently developed PALTEM-HL System for other applications such as potable water, sewers, power cable, oil, telecommunication cable and plants. TG independently has developed PALTEM-HL System for service of pipes of gas.

'Ancillary Materials' means the disposable or semi-disposable materials, required for the PALTEM Systems.

'Apollo-Liner' means a liner with freely-overlapping edges formed from a light curable pre-impregnated composite material sheet used as a point lining material developed by AICL for use with the PALTEM-APOLLO System.

'FREPP-Liner' means a liner made by externally and internally extrusion-coating cylindrically-woven material with thermoplastic resin used as a pipe lining material developed by AICL for use with the PALTEM-FREPP System.

'Liners' means, collectively, the PAL-Liner, the MARCH-Liner, and the FREPP-Liner.

'Manufacturing Intellectual Property Rights' means any patents, utility design, copyright and trademark existing, applied for, registered in or otherwise effective in or affecting the Territory from time to time, and owned and controlled by AICL alone, or AICL and AE, or AICL and TG relating to the manufacturing method and/or structure of the Liners including the patents and patent applications.

'Manufacturing Know-How' means the expertise, practice, experience and technical knowledge of industrial significance built up by AICL which is necessary for the manufacture of the Liners.

'Manufacturing Technology' means the Manufacturing Intellectual Property Rights and the Manufacturing Know-How.

'MARCH-Liner' means a liner made by externally extrusion- coating non-woven material with thermoplastic resin used as a pipe lining material developed by AICL for use with the PALTEM-MARCH System.

'Materials' means the Liners, the SZ-Liner, the APOLLO-Liner, resin, adhesive and materials required for end treatment used with the PALTEM Systems.

'PAL-Liner' means a liner made by externally extrusion-coating cylindrically woven material with thermoplastic resin or having non-woven material and/or other suitable materials inside of the extrusion-coated woven material, or other appropriate liners used as a lining material developed by AICL for use with the PALTEM-HL System.

'PALTEM-APOLLO System' means the patent pending process for point repair by pulling the APOLLO-Robot together with the APOLLO- Liner into the pipe, inflating and light-curing to form a new rigid pipe at the spot to be repaired, including PALTEM-APOLLO-LAC System forming a new pipe at a joint of the lateral and the pipe and reconnecting the lateral.

'PALTEM-FREPP System' means the patent pending process for restoration of pipes by pulling the FREPP-Liner into the pipe and inflating to form a new rigid pipe within the pipe.

'PALTEM-HL System' means the patented process for restoration of pipes by adhesive application or resin impregnation, turning the adhesive coated or resin impregnated PAL-Liner inside out by compressed air within the pipe to insert PAL-Liner into the pipe, and affixing the same to the inner surface of the pipe with the adhesive, or forming a new rigid pipe within the pipe with curing resin by heat.

'PALTEM-LACSTOP System' means the process comprising of PALTEM-SZ-LAC System and PALTEM-APOLLO-LAC System.

'PALTEM-MARCH System' means the process for restoration of pipes by resin impregnation, turning the resin impregnated MARCH- Liner inside out by compressed air within the pipe to insert the MARCH-Liner into the pipe, and forming a new rigid pipe within the pipe with curing resin by heat.

'PALTEM-SZ System' means the patented process for restoration of pipes by pulling SZ-Liner into the pipe, inflating, and forming a new rigid pipe, within the pipe, with curing resin by heat, including PALTEM-SZ-LAC forming a new pipe within a lateral using the SZ liner.

'PALTEM Systems' means, collectively, the PALTEM-HL System, the PALTEM-SZ System, the PALTEM-APOLLO System, the PALTEM-LACSTOP System, the PALTEM-MARCH System and the PALTEM-FREPP System.

'PREMIX' means Premix, Inc., incorporated under applicable law of Ohio and having its principal office at Route 20 and Harmon Road, North Kingsville, Ohio 44068, U.S.A.

Patents and Patents Applications
PALTEM-HL
1) US Pat. No. 4,334,943  Method for smoothly evaginating Canada Pat. No. 1,158,849 tubular material under pressure

2) US Pat. No. 4,350,548  Method and apparatus for providing the inner surface of a pipe line with a lining

3) US Pat. No. 4,882,470  Boring device for opening passage to branch portions of a lined main pipe line

4) US Pat. No. 4,883,557  Method for lining pipelines with a pressurized gas 4,948,452  Apparatus for lining pipe lines including liquid seal means

5) US Pat. No. 5,197,540  Boring device for lining material in branched portions of lined conduit

PALTEM-SZ
1) US Pat. No. 4,600,615  Tubular lining material and a method and apparatus for manufacturing same 4,871,413  Apparatus for manufacturing tubular lining material

2) US Pat. No. 4,681,783  Tubular lining material for pipe lines

3) US Pat. No. 4,684,556  Tubular lining material for pipe lines

4) US Pat. No. 4,877,665  Lining material for pipe lines

5) US Pat. No. 5,077,107  Lining material for pipe lines

IPSCIO Record ID: 579

License Grant
Licensor  hereby  grants  Licensee an exclusive, non-transferable right and license within and throughout the Territory A. To utilize the Know-how, to practice the  inventions of the Patent Rights relating to the Subject Matter, and to sell the resultant product, however, the Subject  Matter may not be used to line tunnels, pipelines and passageways carrying aromatic hydrocarbons in the gaseous state; B. To use any and all Copyrights,  if there are any,  as an adjunct to the practice of such methods and the commercialization thereof; and C. To use and display Insituform as a trademark in connection  with each and every aspect of the exploitation of the Process including but not limited to all materials, apparatus and products sold hereunder purchased from Licensor or a source recommended and approved by Licensor.
Field of Use
Patent rights and inventions relate to methods, apparatus and materials used in the lining of sewers, tunnels, pipelines and other passageways by impregnating an absorbent layer with a synthetic resin, and retaining such layer in place in such passageway while the layer cures or is cured and any improvements thereon.

IPSCIO Record ID: 26758

License Grant
Licensor hereby grants Operator an exclusive, non-transferable right and license within and throughout the Territory.
License Property
Licensor is the exclusive licensee of Licensor International, throughout the United States of America, of certain know-how, patent rights and inventions relating to methods, apparatus and materials used in the lining of sewers, tunnels, pipelines and other passageways by impregnating an absorbent layer with a synthetic resin, and retaining such layer in place in such passageway while the layer cures or is cured and any improvements thereon.

United States Patent
                                   #4,064,211
                                   #4,366,012
                                   #4,385,885
                                   #4,390,574
                                   #4,401,696
                                   #4,439,469

Field of Use
The rights granted apply to passageways.

IPSCIO Record ID: 179266

License Grant
The Licensee has been granted the exclusive rights to use the patents, trademarks and know-how related to the PALTEM-HL system (for all of North America).
The Licensee acquired, from the Japanese Licensor, the exclusive license to offer the PALTEM-HL(R) and PALTEM-SZ(R) systems of pipeline rehabilitation in substantially all of North America and the exclusive right in the territory to utilize and sell materials manufactured by the Licensor for use in pipeline rehabilitation.
License Property
Pipeline Automatic Lining System for trenchless lining of pipes.

PALTEM (Pipeline Automatic Lining SysTEM) is a type of trenchless technique for rehabilitating buried pipelines—such as those carrying gas, potable water, sewage, agricultural water, telecommunications signals, or electricity—without having to dig up the pipe.

Field of Use
The Licensee rehabilitates and improves pipelines in twelve states using the PALTEM-HL system.

IPSCIO Record ID: 27980

License Grant
Licensor hereby grants Operator an exclusive, non-transferable right and license within and throughout the Territory to utilize the  Know-how, to practice the inventions of the Patent Rights relating  to the  Subject  Matter,  and to sell the  resultant  product, however, the Subject Matter may not be used to line tunnels, pipelines and passageways carrying natural or manufactured fuel gases or other  hazardous gases; to use any and all  Copyrights,  if there are any,  as an adjunct to the practice of such methods and the commercialization thereof; and to use and display  the trademark in connection  with each and every aspect of the exploitation of the Process including  but not limited to all materials,  apparatus and products sold hereunder  purchased from the Licensor or a source recommended and approved by the Licensor.
License Property
Patent rights and inventions relate to methods, apparatus and materials used in the lining of sewers, tunnels, pipelines and other passageways by impregnating an absorbent layer with a synthetic resin, and retaining such layer in place in such passageway while the layer cures or is cured and any improvements thereon.

IPSCIO Record ID: 25840

License Grant
The Licensor  hereby grants Licensee an exclusive, non-transferable right and license within and throughout the Territory.
License Property
A. To utilize the Know-how, to practice the inventions of the Patent Rights relating to the  Subject Matter, and to sell the resultant product; however, the Subject Matter may not be used to line tunnels, pipelines and passageways carrying aromatic hydrocarbons in the gaseous state; B. To use any and all Copyrights, if there are any, as an adjunct to the practice of such methods and the commercialization thereof; and C. To use and display Insituform as a trademark in connection with each and every aspect of the exploitation of the Process  including but not limited to all materials, apparatus and products sold hereunder purchased from Licensor or a source recommended and approved by Licensor, all equipment,  letterheads, invoices, advertising signs of all types and printed material shall bear appropriate insignia acknowledging such products, materialor equipment as under exclusive license from Licensor.
Field of Use
Patent rights and inventions relate to methods, apparatus and materials used in the lining of sewers, tunnels, pipelines and other passageways by impregnating an absorbent layer with a synthetic resin, and retaining such layer in place in such passageway while the layer cures or is cured and any improvements thereon.

IPSCIO Record ID: 29067

License Grant
The  Licensor  hereby  grants Licensee  an  exclusive, non-transferable right and license within and throughout the Territory of Maryland, Virginia and the District of Columbia, to utilize the  Know-how,  to practice the  inventions of the Patent Rights  relating  to the  Subject Matter, and to sell the resultant product; however, the Subject Matter may not be used to line tunnels,  pipelines and passageways carrying aromatic hydrocarbons in the gaseous state; and to use any and all  Copyrights,  if there are any,  as an adjunct to the practice of such methods and the commercialization thereof; and to use and display 'Insituform' as a trademark in connection  with each and every aspect of the  exploitation  of the  Process  including  but notlimited to all materials,  apparatus and products sold hereunder  purchased from Licensor or a source  recommended and approved  by Licensor,  all equipment, letterheads, invoices, advertising signs of all types and printed material shall bear appropriate insignia  acknowledging such products,  materialor equipment as under exclusive license from Insituform of Licensor.
License Property
United States Patent #4,064,211
Field of Use
Patent rights and inventions relate to methods, apparatus and materials used in the lining of sewers, tunnels, pipelines and other passageways by impregnating an absorbent layer with a synthetic resin, and retaining such layer in place in such passageway while the layer cures or is cured and any improvements thereon.

IPSCIO Record ID: 26180

License Grant
The Licensor  hereby grants Licensee an exclusive, non-transferable right and license within and throughout the Territory.
License Property
A. To utilize the Know-how, to practice the inventions of the Patent Rights relating  to the  Subject Matter, and to sell the resultant product; however, the Subject Matter may not be used to line  tunnels, pipelines and passageways carrying aromatic hydrocarbons in the gaseous state;

B. To use any and all Copyrights, if there are any, as an adjunct to the practice of such methods and the commercialization thereof; and

C. To use and display Insituform as a trademark in connection with each and every aspect of the  exploitation of the Process  including  but not limited to all materials, apparatus and products sold hereunder  purchased from Licensor or a source recommended and approved by Licensor.  All equipment, letterheads, invoices, advertising signs of all types and printed material shall bear appropriate insignia acknowledging such products, material or equipment as under exclusive license from Licensor.

Field of Use
Patent rights and inventions relate to methods, apparatus and materials used in the lining of sewers, tunnels, pipelines and other passageways by impregnating an absorbent layer with a synthetic resin, and retaining such layer in place in such passageway while the layer cures or is cured and any improvements thereon.

IPSCIO Record ID: 139681

License Grant
Licensor grants Sublicensee an exclusive, non-transferable right and license within and throughout the Territory, to utilize the  Know-how, to practice the  inventions of the Patent Rights relating to the  Subject  Matter,  and to sell the resultant  product; however, the Subject Matter may not be used to line tunnels, pipelines and passageways carrying aromatic hydrocarbons in the gaseous state; to use any and all Copyrights, if there are any, as an adjunct to the practice of such methods and the commercialization thereof; to use and display  'Insituform'  as a trademark in connection with each and every aspect of the  exploitation of the Process.
License Property
IP includes certain know-how, patent rights and inventions relating to methods,  apparatus and materials used in the lining of  sewers,  tunnels,  pipelines and other passageways by impregnating an absorbent layer with a synthetic resin, and retaining such layer in place in such passageway while the layer cures or is cured and any improvements thereon.

IPSCIO Record ID: 139696

License Grant
The Company entered into the agreement with the Licensor for the sale and  installation of preformed PVC thermoplastic pipe under the NuPipe(R) process and  trademark.
License Property
The process is rehabilitating underground sewers and other pipelines, principally using cured-in-place pipe ('CIPP') processes.
Field of Use
This agreement pertains to the construction industry.

IPSCIO Record ID: 5180

License Grant
Licensor hereby grants to Licensee an exclusive world-wide license in the Licensed Territory under the Patent Rights,  Improvement Patents, Licensed Products, Confidential Data and Fawley Technology to

(i) manufacture, use, exploit and sell Licensed Products; and
(ii) with the express prior written consent of Licensor, which Licensor shall not unreasonably withhold, sublicense to credit-worthy and commercially capable parties the right to manufacture, use and sell, Licensed Products and to utilize the Patent Rights, Improvement Patents, Confidential Data and the Fawley Technology in connection therewith.

License Property
Composite Reinforced Cylinders and Tubes. Composite reinforced cylinders or tubes are spun, produced from either aluminum or steel, or other metals, and then reinforced with high-strength composite material. Patents held by sublicensor pertaining to the products described herein include U.S. #4,589,562 'Structures Reinforced by a composite material', and related foreign patents; U.S. #4,559,974.

1. Composite Reinforced Pipe Without Autofrettage, being pipe produced of any metal which is reinforced with high-strength composite on the outside to prevent propagating ductile fractures or to increase the burst pressure. Patents pertaining to the product described herein include U.S. #4,589,562 'Structures Reinforced by a Composite Material', and related foreign patents; and U.S. #4,676,276 'Method of Treating a Pipe and Product Produced Thereby' and related foreign patents.

2. Composite Reinforced Pipe with Autofrettage, being pipe produced of any metal which is reinforced with high-strength composite on the outside to prevent propagating ductile fractures or to increase the burst pressure of the pipe. After hydraulically or mechanically, past its yield point to induce a negative or compressive stress on the pipe itself at zero pressure. Patents held by Licensor pertaining to the products described herein include U.S. #4,589,562 'Structures Reinforced by a Composite Material', and related foreign patents; and U.S. #4,676,276 'Method of Treating a Pipe and Product Produced Thereby' and related foreign patents.

3. Composite Reinforcement Rehabilitation Systems, being products or processes composed of, or utilizing products composed of lightweight, non-metallic, high tensile strength filaments in a resin matrix wound around or otherwise applied in shops, fabricators or pipe manufacturing facilities, facilities to pipe or other objects for the purpose of (i) preventing a propagating ductile fracture in, or to increase the burst strength of, such pipe or other object or (ii) reinforcing, repairing or rehabilitating objects, such as pipe. Patents held by Licensor pertaining to the products or processes described herein include U.S. #4,589,562 'Structures Reinforced by a Composite Material', and related foreign patents; U.S. #4,559,974 'Apparatus and Method of Arresting Ductile Fracture Propagation' and related foreign patents; U.S. #4,676,276 'Method of Treating a Pipe and Product Produced Thereby' and related foreign patents; and U.S. #4,700,752 'Clock Spring Crack Arrestor' and related foreign patents and other patents pending.

4. Storage Tank Rehabilitation Systems, being systems which involve the use of composite technology described in (1) hereinabove ('Composite Reinforced Pipe Without Autofrettage') to reinforce large diameter liquid storage tanks, typically 100' to 300' in diameter to prevent a catastrophic rupture of these tanks. Patents held by Licensor pertaining to the Products described herein include U.S. #4,589,562 'Structures Reinforced by a Composite Material', and related foreign patents; U.S. #4,559,974 'Apparatus and Method of Arresting Ductile Fracture Propagation' and related foreign patents; U.S. #4,676,276 'Method of Treating a Pipe and Product Produced Thereby' and related foreign patents. A pending U.S. patent application held by Licensor and pertaining to the products described herein is Serial No. 07/274,278, 'Method of Preventing Bursting of Storage Tanks and Burstproof Tanks Products Thereby'.

5. Gas Transport Module being a product which involves the use of 30' to 42' diameter line pipe, configured in 80' sections, with heads welded on each end, sidewalls reinforced and then subjected to Autofrettage. The tubes could be placed on barges and collect gas from offshore wells. Similar applications are also envisioned for onshore facilities. In this case, these tubes might be either spun tubes or have heads welded on them. Patents held by Licensor pertaining to the products described herein include U.S. #4,589,562 'Structures Reinforced by a Composite Material', and related foreign patents; and U.S. #4,676,276 'Method of Treating a Pipe and Product Produced Thereby' and related foreign patents.

Field of Use
The Company's composite-reinforced aluminum fuel storage cylinders are manufactured and sold under a royalty-bearing, exclusive world-wide license (fuel storage systems for use on-board natural gas vehicles).

IPSCIO Record ID: 27112

License Grant
The Company had the right to practice certain claims with respect to piping used in the Enviroflex and Omniflex system pursuant to an exclusive worldwide license with respect to patents.
License Property
Enviroflex(R) is a flexible double-wall pipe for the conveyance and secondary containment of motor vehicle fuels from underground storage tanks to product dispensers.

IPSCIO Record ID: 26031

License Grant
The United Kingdom Licensor grants to the Licensee from the Effective Date the exclusive right (being a License as defined for the purposes of this Agreement) under the Patents and Know-­how to make the Licensed Products and to use, sell and otherwise dispose of the Licensed Products so made in the Territory and to sub-license any of such rights OIl the terms of a Sub-license to be approved by Licensor prior to grant, such approval not to be unreasonably withheld or delayed.
License Property
Technology relates to PIM process.

Licensed Product any automotive product or component which does not feature as part of its manufacture the essential encapsulation of a magnesium part.

The Patents Country country-region place USA
Patent Application No. 6,663,822
country-region place Brazil
Provisional Filing No. 004406 Canadian Application No. 2367819
ZL 00 805413.4
00918302.1
HK1046115
country-region place Mexico Application No. PA/a/2001/009614
country-region Canada country-region China country-region place Europe
Hong Kong country-region place Mexico

Field of Use
Field of Use any product in the automotive field which can be manufactured using the Patents and Know-How.

IPSCIO Record ID: 28647

License Grant
Licensor hereby grants to German Licensee a non-exclusive license under the Licensed Patents to practice the processes and to make, use and sell products covered by the claims of the Licensed Patents.
License Property
The Licensor develops clean tech, EcoBloc-enabled, ultra-violet (UV) curable coatings. The Company's markets include electronics, steel, construction, automotive and trucking, paper products and original equipment manufacturers (OEMs).

A U.S. company, specializing in the discovery and development of nanotechnology-enabled, ultraviolet-curable advanced coatings, announced it has entered into a license agreement with German-based chemical company.

Under the terms of the license agreement, licensor is providing licensee with a non-exclusive license for use of its patents, EP 1 723 180, US 7,323,248, US 7,153,892 and US 7,498,362.

* Patent EP 1 723 180 pertains to a coating for metal objects and can be used on automotive parts and many other industrial articles. The coating is especially useful for metal objects with rubber or plastic parts that would be damaged by heat.

* Patent US 7,323,248 pertains to a coating for fiberglass panels. It applies to a wide variety of panels, especially those used in shopping malls, as it is resistant to sunlight and graffiti can be easily removed.

* Patent US 7,153,892 pertains to a coating for olefin plastics, such as car bumpers. A major benefit of the coating is its ability to adhere without a primer.

* Patent US 7,498,362 pertains to a coating for metal objects. It is very similar to the European patent, but for use in the United States.

A variety of consumer, scientific, and industrial products utilize composite materials, such as fiberglass, in a variety of shapes and forms. Coating such composite surfaces with solvent based coating can be problematic due solvent incompatibility and environmental issues stemming from evaporation of the volatile solvent. Also, such coatings can require thermal curing, resulting in the need for curing ovens, and the associated energy expenditure to operate them. U.S. Pat. No. 4,721,734 describes the use of one-part UV curable compositions incorporating aliphatic urethane acrylates and acrylate monomers to produce non-yellowing coatings. U.S. Pat. No. 5,733,607 describes the use of UV curable coating on fiberglass.

Field of Use
The Licensee develops, produces and markets a high-quality range of innovative automotive OEM coatings, automotive refinishes, industrial coatings and decorative paints.
Disclaimer: The information gathered from RoyaltySource® database was sourced from the U.S. Securities and Exchange Commission EDGAR Filings and other public records. While we believe the sources to be reliable, this does not guarantee the accuracy or completeness of the information provided. Further, the information is supplied as general guidance and is not intended to represent or be a substitute for a detailed analysis or professional judgment. This information is for private use only and may not be resold or reproduced without permission.